Factory Supply High Quality Stainless Steel Pipe Elbow

Product Details

An elbow is installed between two lengths of pipe (or tubing) to allow a change of direction, usually a 90° or 45° angle; 22.5° elbows are also available. The ends may be machined for butt welding, threaded (usually female) or socket. When the ends differ in size, it is known as a reducing (or reducer) elbow.
Elbows are categorized by design. The radius of a long-radius (LR) elbow is 1.5 times the pipe diameter. In a short-radius (SR) elbow, the radius equals the pipe diameter. Ninety-, 60- and 45-degree elbows are also available.

pipe elbow ,elbow,steel elbow,carbon steel elbow,90.jpg

Material: A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6
Outer Diameter (D): D<=1220mm
Wall Thickness (T): T<=120mm
L/R Elbow( 90deg & 45deg & 180deg.)
S/R Elbow (90deg & 180deg.)
Pressure: SCH5 to SCH160
Manufacturing standard: ANSI, JIS, DIN, EN, API 5L, etc.
Bending Angle: Degree 15, 30, 45, 60, 90, 135, 180 and also could manufacture according the angles given by the clients.
End Bevel: According to the bevel of welding pipe fittings construction
Surface treatment:Shot blasted, rust-proof black oil