JIS B 2312 Japanese Standard Fitting 45E(L) Elbow 65A Material PA12

Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5 Degree Elbow Carbon Steel are also used in piping system.

Product Details

        Carbon Steel Pipe Elbow are split into 5 opportunities, the Carbon Steel 90 Degree Elbow, Carbon Steel 45 Degree Elbow and CS 180° elbows, all three in the "long radius" version, and in addition the 90° and 180° elbows both in the "short radius" version. Radius of Long Radius (LR) Elbows is 1.5 times the pipe diameter. Radius of Carbon Steel Short Radius Elbow is 1.0 times the pipe diameter. Carbon Steel Seamless Elbow are in demand for use between two lengths of pipe or tube allowing a change of direction, usually these elbows distinguished by connection ends.

         We supply carbon steel elbows of different standards(ASTM, ASME, NACE, MSS).

Generally also contain small amounts of silicon, manganese, sulfur, phosphorus and carbon steel, in addition to carbon use can be divided into carbon steel and carbon structural steel, carbon tool steel, and ease of cutting structural steel three categories. Carbon structural steel is divided into building structural steel and machinery manufacturing structural steel two kinds.

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

         Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Elbows are categorized based on various design features as below:

Long Radius (LR) Elbow is also called LR elbow – means the radius is 1.5 times the pipe diameter

L/R 45°Elbow: Long radius 45 degree elbow changes the direction by 45 degrees.

L/R 90°Elbow: Long radius 90 degree elbow changes the direction by 90 degrees.

L/R 180°Elbow: Long Radius 180 degree return bend allows complete reversal of flow.

Short Radius (SR) Elbow is also called SR elbow, – means the radius is 1.0 times the pipe diameter

Short radiu 45°Elbow: Short radius 45° elbow changes the direction by 45 degrees.

Short radius 90°Elbow: Short Radius 90° elbow is same as LR90 except for the measurement between end of elbow to center line is 1 x NPS.

Short radius 180° Elbow: Short Radius 180° return bend allows complete reversal of flow

Size range:

Elbow Size

Seamless elbow: 1/2"-24" DN15-DN600

Welding elbow: 6"-72" DN150-DN1800

Wall thickness: Sch5-Sch160 XXS

45-Degree-Elbow

Inquiry