Generally also contain small amounts of silicon, manganese, sulfur, phosphorus and carbon steel, in addition to carbon use can be divided into carbon steel and carbon structural steel, carbon tool steel, and ease of cutting structural steel three categories.
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.
Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
Carbon Steel Elbow is primarily used in the installation of industrial pipelines for changing the material flow in a specific direction. Available in different bending angles, these elbows are treated with various types of surface finishing as to suit different industrial requirements. Highly resistant to temperature, chemicals and corrosion, these CS elbows ensure zero defects in the designing.
Made with utmost precision, these elbows are offered in different pressure ratings and wall thickness. Available in 45 deg, 90 deg and 180 deg bends, the elbows are used in low and middle pressure fluid pipelines, boilers and fertilizer pipelines for a change in the flow direction. With wide options in surface finish like black painted, galvanized and anti rust, the elbows are designed with both long and short radius to suit the industrial requirements.