Carbon Steel Pipe Fittings pipe of several major categories of product applications, the so-called Carbon Steel Pipe Fittings is actually a material, including Q235B, 20 #, Q345B, etc. These materials are called Carbon Steel Pipe Fittings, made of these materials elbow, flange, , Reducer and other products called Carbon Steel Pipe Fittings pipe fittings, just said that these categories are also a few categories of pipe products, elbow: used to change the direction of the pipeline is also the name suggests that is used to turn the bend is the same The role of the bend is just higher than the bend of the bend. Flange: Used to pipe the pipe or pipe fittings, the flange with a bolt hole above the flange welded to the ends of the pipe and then use the bolt to connect the flange so easy to replace the pipeline. Three links: that is, three mouth three sides are used to pipe bifurcation, such as a pipe want to make it into two directions then use the three links on it. Reducing pipe: generally a small section of the pipe to reduce the size of the pipe made of a large pipe, used to transform large diameter pipes into small caliber, for example, you want a 325 diameter pipe to connect 219 caliber pipe With a 325 variable 219 reducer connection just fine. The above describes the Carbon Steel Pipe Fittings pipe is the introduction of several major categories of products and applications.
If a fight without smoke has started, then in the Carbon Steel Pipe Fittings pipe industry, a no smoke of the war has long been quietly opened the curtain.
Quality determines whether the Carbon Steel Pipe Fittings pipe fittings in the real estate construction to prove their own, with the quality of speaking, for the people to make things happen.
Carbon Steel Pipe Fittings pipe fittings use a very wide range, the most commonly used or some of the construction pipeline and some oil projects to use. There is damage to use, do the maintenance of the pipeline is also very important, today Xiaobian to share the two tips for cleaning.
Place the Carbon Steel Pipe Fittings pipe to be cleaned horizontally, slightly tilted, below the lower port of the Carbon Steel Pipe Fittings pipe, set the container for the cleaning residue, and clean the dust on the inner wall of the Carbon Steel Pipe Fittings pipe.
Washing the inner wall of the Carbon Steel Pipe Fittings pipe with a rinsing liquid, wherein the rinse liquid is an aqueous solution of sodium phosphate having a pH of 8 to 12.5 adjusted with phosphoric acid, wherein the mass fraction of sodium phosphate is 1% to 2%.
There is the use of special acidic liquid, cleaning methods are basically the same, are to protect the Carbon Steel Pipe Fittings pipe fittings, to extend the service life.