1 INCH FLANGE SW RF CL300 SCH80 A182-F5 ASME B16.9

Our slip-on flanges are available with raised, flat, or RTJ faces, and are also available in orifice configurations.

Product Details

         The slip on flange has a low hub and slips onto the pipe prior to welding. Welding is carried out on the inside and outside to provide sufficient strength and prevent leakage. Slip on flanges are all bored slightly larger than the OD of the matching pipe to allow for the welds to hold. They are many times preferred over weldnecks due to their lower cost, though net installation cost is often the same due to the additional welding.

         Slip-On Flanges are probably the most common type of flanges in the industry and are ideal for lower pressure applications. You do not have to specify the pipe schedule when using slip-on flanges due to the fact that its inside diameter is determined by the outside diameter of the pipe. This outside diameter of the pipe does not change for the different schedules. This often makes these easier to stock for vendors. Fabricators also like the fact that these flanges are slightly easier to align than weld neck flanges. 

        They also are slightly easier to cut pipe to the proper length for. They can be used for high temperature and pressure applications but are not generally recommended as compared to other types of flanges. ASME B16.5 Code limits their usage in the 1500#-2500# (lbs.) weight classes. The three most common types of facings that We carries for slip-on flanges are raised face (most common), flat face, and ring type joint (RTJ). We offers these flanges in stainless and alloy material.

Hot Tags: 1 inch flange sw rf cl300 sch80 a182-f5 asme b16.9, China, suppliers, manufacturers, factory, wholesale
Inquiry

You Might Also Like