DN20,DN25,DN40,DN80,DN100 Carbon Steel PN16 SO RF Flanges A105

These flanges are available in all of our stainless steel and chrome-moly grades, from ½” to 36” and beyond, class 150 to 2500. We also stock large diameter LDS Slip-On flanges in A105N, and can supply all sizes of LDS Slip-Ons and AWWA C207 Slip-Ons-with or without a hub – with longer lead times.

Product Details

         The slip on flange has a low hub and slips onto the pipe prior to welding. Welding is carried out on the inside and outside to provide sufficient strength and prevent leakage. Slip on flanges are all bored slightly larger than the OD of the matching pipe to allow for the welds to hold. They are many times preferred over weldnecks due to their lower cost, though net installation cost is often the same due to the additional welding.

      Slip-On Flanges are probably the most common type of flanges in the industry and are ideal for lower pressure applications. You do not have to specify the pipe schedule when using slip-on flanges due to the fact that its inside diameter is determined by the outside diameter of the pipe. This outside diameter of the pipe does not change for the different schedules. This often makes these easier to stock for vendors. Fabricators also like the fact that these flanges are slightly easier to align than weld neck flanges. 

Hot Tags: dn20,dn25,dn40,dn80,dn100 carbon steel pn16 so rf flanges a105, China, suppliers, manufacturers, factory, wholesale

You Might Also Like